![](https://desert.nyuadim.com/wp-content/uploads/2022/09/1-Prep-scaled.jpg)
![](https://desert.nyuadim.com/wp-content/uploads/2022/09/2-Pins-scaled.jpg)
![](https://desert.nyuadim.com/wp-content/uploads/2022/09/3-Sandwich.jpg)
![](https://desert.nyuadim.com/wp-content/uploads/2022/09/4-Flip.jpg)
![](https://desert.nyuadim.com/wp-content/uploads/2022/09/5-Visee-scaled.jpg)
![](https://desert.nyuadim.com/wp-content/uploads/2022/09/6-Tape-scaled.jpg)
![](https://desert.nyuadim.com/wp-content/uploads/2022/09/6b-Tape-scaled.jpg)
![](https://desert.nyuadim.com/wp-content/uploads/2022/09/8-All-pins-scaled.jpg)
![](https://desert.nyuadim.com/wp-content/uploads/2022/09/9-Done-scaled.jpg)
![](https://desert.nyuadim.com/wp-content/uploads/2022/09/10-Breadboard-scaled.jpg)
![](https://desert.nyuadim.com/wp-content/uploads/2022/09/11-Stacked-scaled.jpg)
Make sure to watch out for these common soldering problems, particularly solder bridges (when too much solder connects two things that shouldn’t be connected). Solder bridges can cause a short circuit that damages the board! You need to check for these and them before turning on the power.
![](https://desert.nyuadim.com/wp-content/uploads/2022/09/tools_Solder_Bridge.jpg)
Solder bridge image from Adafruit